LeViteZer Control Software

How would you like to have full control of BMMSC using your computer, tablet and in future also phone?

IMG_1596
The LeViteZer Control SW that runs on Windows, Mac, Linux and Android. The USB to SDI box fully supports the easy to use LeViteZer protocol, so you can integrate it also with your own application. (Links below )

colors
It can be used to control one camera, multiple cameras connected with SDI splitter one at the time and especially handy for a multi-camera setup like 360 video rig. All the cameras can be controlled at the same time using camera ID 0 on the LeViteZer Control software. This will broadcast the commands to all the cameras or they can be controlled one at the time using dedicated camera ID set on the camera menu.

It has been tested with the BMMSC but should operate also with other BMD cameras that supports the SDI control.

The current version of LeViteZer Control software supports only camera control, the PTZ control will return on next release. The USB to SDI box supports the PTZ control over SDI that makes possible to connect the PTZ head on the BMMSC expansion port.

There will be a small run of the USB to SDI box based on orders, maximum 10 at this time. The LeViteZer Control software is free to use with the box.

The price is 395 USD / 320 euro VAT 0% + shipping. We use DHL for shipping, it is around 50 to 100 USD depending of location, available mid May. To order contact me. ( kim.janson@levitezer.com )

Later on we will have also a control box that support interfacing over Ethernet and much improved PTZ control using a gimbal as described here

Links:

-
LeViteZer Control Protocol
-
LeViteZer Control Software
-
Users manual
-
LeViteZer gimbal control

Note: We are still working to improve Android support, especially user interface on a phone.